ContentBlocks 8 1 Ads Shiloh Standard copy

Research Topics

Conservation Program at Tel Shiloh

Dr. Leen Ritmeyer, Ritmeyer Archaeological Design

During the months of May/June 2017, excavations were carried out at Tel Shiloh. At the conclusion of the dig, conservation work needed to be carried out on some walls that were in danger of deterioration or collapse. One section of the Middle Bronze Age city wall, W17 in Square AC-30, was selected for conservation. This wall was built of large ashlars, but in between these large stones were patches of small stones that needed to be consolidated (Fig. 1).

In addition, the walls belonging to MBA storage rooms in Square AE-30 were found to be in a poor state of preservation. The main conservation effort was therefore focussed on Walls 19, 20 and 21 (Fig. 2), and also on the westernmost wall of the MBA storerooms, in Square AD-30, that had been revealed in the Danish excavations (Fig. 3). These four walls formed two rooms that were interconnected by doorways.

Ancient walls were made by placing fieldstones at the interior and exterior faces. The core of the wall usually consists of small stones held together by a soil-based mortar (Fig. 4). The basic process of conservation is first to remove all soil from between the stones with a small pick and brush (Fig. 5). The remaining soil was then removed with a strong water jet (Fig. 6). The latter made the walls dirty and therefore they needed to be cleaned by spraying water in between and over the stones. Only then were the walls ready for conservation (Fig. 7). Stones that were missing or that had fallen were replaced with suitably sized stones (Fig. 8).

The Photos for this Article can be found on the ABR FaceBook Page

After the wall was thoroughly cleaned, the mortar mixture needed to be prepared. We used imported heat-treated NHL 5 natural hydraulic lime, Class M2.5, which is a cement-free mortar (Fig. 9). One shovel of quarry sand and half a shovel of sifted soil was added to one 25 kg bag of this mortar. The quarry sand was added to give texture to the smooth mortar and the sifted soil was added to give a more natural color to the mix. The mortar, sand and soil were thoroughly mixed with water in a wheelbarrow to a smooth consistency before application (Fig. 10).

The best way of conserving ancient walls is to inject the mortar as deep as possible into the core of the wall, so that the exterior faces of the wall remain clean and retain their authentic look. Mortar is usually put on a mortarboard or tray and pushed into the joints or gaps with a pointing trowel. Adequately sized stones were placed into large gaps and secured by the mortar. We found that a mortar pointing gun was much more effective (Fig. 11). The wet mortar was inserted into the guns tube and then injected into the inner core of the wall (Fig. 12). The mortar was then pushed in between and against the stones with a wet 1.5” paintbrush. The advantage of this method is that the stones of the wall are bonded together by mortar from the inside. This prevents unsightly and unnecessary smearing of mortar on the outer faces of the wall, thus preserving the authentic look of the ancient walls. The most important part of the conservation of a wall is its top, or coping (Fig. 13). When the top of the wall is conserved well, rainwater cannot penetrate the core of the wall and thus its preservation is secured.

After the mortar had set (see Figs 14-16), any remains of mortar that had flowed onto the stones was wire brushed so that the outer faces of the stones were clean and free from mortar (Fig. 17).

Although it is not necessary to employ skilled labor, it is important to professionally supervise the conservation work so that it is carried out according to the procedures set out above. I was pleased to have Dr. Phil Silvia, Dr. David Graves and Greg Gulbrandsen as willing helpers, who quickly learned the ropes of the trade and put their hearts and souls into the conservation project (Fig. 18). Having conserved these storeroom walls, they are a beautiful testimony to the building techniques of the past and can now be enjoyed by the many visitors that come to Tel Shiloh.


ABR fulfills its mission through memberships and generous donations from supporters.

Join us in our mission! No matter what your level of interest, from keeping abreast of the fascinating research that comes out of the field work, to actively participating in an archaeological dig, you can become an integral part of our ministry.

Please click here for our support page.


Phone: 717-859-3443

Toll Free:  800-430-0008


PO Box 144, Akron, PA 17501

Click here for our Privacy Policy





Site Design and Management by: Nehemiah Communications [] & Enktesis []

abrwebtemplate36 1/1/2021